Eckhardt 247 Instructions
Gear
Control Panel
Instructions
How to connect laptop to display
There is an HDMI cable on the center of the table.
Plug the HDMI from table into your HDMI laptop port.
Display should automatically connect and show on TV.
How to connect to zoom meeting from touch panel
Join a meeting:
On the touch panel press “Join”
You will be asked to enter the meeting ID of the meeting you are connecting to.
Use the room’s built in zoom meeting:
ERC 247 also has a built in room specific zoom meeting. You can join and invite participants to this personal zoom meeting right from the touch panel. This is helpful for hosting impromptu meetings.
Click “New Meeting” and you will start the zoom meeting. From here you can invite people right from the touch panel by clicking “Invite.”
Camera Controls:
The speaker bar under the TV has a built in microphone and camera. The controls from the camera can be accessed while in a zoom meeting by pressing “Camera Control.”
Manual mode will allow you to chose where the camera is focused.
Speaker Focus will have the camera automatically zoom in on whichever participant is speaking. It will adjust its position and zoom according to where sound is coming from in the room. If no one is speaking it will show the entire room.
Auto-Framing will focus the camera where speakers are sitting in the room. If everyone is on one side of the room, the camera will hold stead focus on that location. This is helpful to focus the camera for smaller groups of people in the room presenting to a larger zoom audience.
Multi-Stream will find all the participants in the room and break up the video stream into segments focusing each segment on every individual in the room. It is know as the “Brady Bunch” cam.
When you have finished with the room. Turn off the system with the power button and make sure the projector is turned off.