3d Printer Best Practices

General Usage

When loading the filament into the printer you can avoid the filament getting stuck by cutting the end at an angle such that the long end is on the convex side of the filament:

Prusa Printers:

Prusa i3 MK3/MK3S
Always include a brim
Prusa i3 M2.5S
Use only “30% Fan” filament profiles in PrusaSlicer
PETG
Spray thin layer of Windex on print bed prior to printing
Prusa i3 MK3 MMU2
Pray

Raise3D Pro2

1. BuildTak Print Bed FAQ: https://www.buildtak.com/support/#FAQ