Laser Cutter BOSS HP-2436

Manuals and Guides for the BOSS HP-2436 Laser Cutter are in the ETSG_Laser_Shared_Files Box folder at

https://uchicago.box.com/s/83ojh0jb8fbbpva9d6fr8blmtt7hr2z3

If you can’t access the folder, contact any ETSG personnel.

MANDATORY: Before using the laser, review the Laser Registration and SOP Form.pdf in this folder.

TIP: Follow the ETSG_Boss_Laser_Checklists.pdf attached in this folder when you use the laser.

LASER TRAINING: You can use the laser with the help of support personnel when they are available. To use the laser by yourself, you need the following training:

• Have one of the support personnel walk you through the necessary documents and the main steps to use the laser.
• Read the checklist and the safety manual. Familiarize yourself with the other documents in the ETSG_Laser_Shared_Files Box folder
• Design a small part to be produced by the laser which includes: cutting, etching, text and at least one concave side. Shouldn’t take more than 5min on the laser.
• Etch / cut your part under support personnel supervision.
• Get added to the list of certified users.

SOFTWARE: Download LaserCAD from https://www.bosslaser.com/laser-software