by benstillwell | Oct 10, 2023
General Usage When loading the filament into the printer you can avoid the filament getting stuck by cutting the end at an angle such that the long end is on the convex side of the filament: Prusa Printers: Prusa i3 MK3/MK3S Always include a brim Prusa i3 M2.5S Use...
by benstillwell | Oct 10, 2023
Luigi Mazzenga CALIPERS Calipers were designed to provide accuracy a standard scale or rule could not. There are three types of calipers available, the vernier caliper, dial caliper and digital caliper. However, whichever you choose they will share the same basic...
by benstillwell | Oct 10, 2023
Xerox VersaLink C7020 MFP IP address: 10.135.102.55.
by benstillwell | Oct 10, 2023
Introduction To get an introduction on 3D printing, read the basics-of-3D-printing.pdf attached to this page. Printers RAISE3D Pro 2: Use ideaMaker software to slice objects. Can send files directly to printer from lab computer. Perform Z-homing before each print to...
by benstillwell | Oct 10, 2023
V2+of+Home+Position+&+Travel V2+Pocket+NC+Work-Holding V2+Shipping+Bolts V2+Software+Overview V2+Tool+Length+Offsets
